HomeLife StylePutting Together a Shadowbox

Putting Together a Shadowbox

Step-by-step instructions for building a paper lightbox.

Paper lightboxes might help you save money. It would be a beautiful addition to any house or business, as well as a lovely gift for a special event such as a birthday or wedding. You will, however, be able to appreciate the aesthetic worth of the artwork. To make this light box, paper cutouts are placed in a box with a glass front panel. LED lights behind each layer give a three-dimensional illusion. This light box will be constructed from the ground up, and I’ll share some of the lessons I’ve learnt along the way.

Here is a list of everything I utilised to assist you:


If you want to make your cards stand out while still allowing light to get through, I recommend using 170 gramme white cardboard. If you have a big shadow box, however, you should weigh between 200 and 220 grammes.

A utility knife may be used for a wide range of tasks.

Wood glue is one of the most often used adhesives. RGB LED bulbs on strip lights are utilised in this project. There are choices for mica and glass panels.

What you’re searching for in a board is foam cored boards.

Make a duplicate of the templates you wish to use so you may use them again. If you wish to print a photograph at its original size, choose “Do not scale” from the print menu instead of the regular print option. Various programmes display print modes in a variety of ways. Please check out lightboxgoodman for more details.

Cutting out designs with a knife

After you’ve finished the first layer, cut it out of the paper using an X-Acto knife. An X-acto knife, when used appropriately, produces a precise and clean cut for all of your domestic activities.

By cutting off and re-cutting the overlapping layers of material, you can get rid of them.

Apply glue to the seams as soon as you’re finished to seal them together.

The multiple layers are connected by foam spacers. This method gives the image a three-dimensional appearance and a feeling of depth. With a sharp knife, you can simply cut off the foam spacers by hand. They are identical in terms of height and breadth. There should be four spacers between each layer. I used a glue gun to adhere the layers together after cutting them out. After glueing the first layer, place spacers around the exterior of the item and stick the second layer on top. Check the layers using a level to prevent misalignment. All of the levels should be linked at this point.

There isn’t enough light in the room.

The box might be decorated with light-emitting LEDs. To ensure that the lights were the right length, they were cut and fitted into the container. You are completely free to do anything you want with them!

You might, for example, use fairy lights or LED lights. My firm sells RGB LED strip lights that are flexible and self-adhesive. They may also change colour to provide a more dramatic effect. They also create very little heat, if any at all. As a consequence, they’re excellent prospects for positions in this industry. I had to first install the lights and then secure them with caulk and cement in order to run the power line across the backyard and secure it.

Popular posts

All Categories

My favorites